Suitable for cloakrooms, utility rooms and basements.

Suitable for domestic applications.

In a typical domestic property there is usually just one single soil pipe which are normally situated at the back of the house to take any waste water away. If you need to, or want to, install a new toilet but don’t have the access you need to the soil pipe then fitting a Saniaccess 1 is just what you need to do.

A Saniaccess 1 macerator is a unit that connects to the back of your toilet and effectively chops up waste into slurry to allow easy pumping into your home’s sewage system. They give you the flexibility to install a WC where you might have thought that it’s either impossible or impractical.

With correct use and installation you won’t need to worry about them creating any bad smells or being difficult to clean either!

The Saniaccess 1 macerator is activated automatically by the water entering the unit. This water is then forced through the discharge pipe and then finally the non-return valves to prevent it from returning back into the unit.

Features and Benefits for the Saniflo Saniaccess 1 Macerator Pump:

•  Compatible with a WC.
•  Saniflo units are normally situated behind a WC with a horizontal outlet spigot which conforms to BS EN 33 or 37.
•  Easy service access through the top of the unit and easy maintenance without the need to remove the unit.
•  Sufficient to remove waste from a toilet as it has one toilet inlet connection.
•  There’s no need to be afraid that using it at night will wake the entire house as the Saniaccess 1 uses quiet technology with only a 46dB noise level.   Unit Technical Data:

•  Suitable for bathrooms with an IP44 rating
•  Average temperature: 35 Degrees Centigrade
•  Electrical Supply: 220-240 /50
•  Iso: EN 12050-3
•  Wattage: 400w
•  Discharge pipe diameter: 22/28/32mm   Discharge Lengths:

•  Vertical Discharge: 5m
•  Horizontal Discharge: 100m   Unit Dimensions:

•  Height: 330mm
•  Width: 424mm
•  Depth: 222mm

Dimensions: